Sulphur Spinner

Written by Bill Dorgeloh Hits: 877

Fly Materials

Wing	1/3 of strand of Wapsi polypropylene floating yarn light yellow.
Tail	Ginger hackle fibers (tie in split).
Hackle	Ginger.

Tying Instructions

Instructions

Notes: The wing is tied in with figure 8's and kept flat,
about 5/4 hook shank
length wind the hackle for and aft of wing and then cut off top and bottom of
the hackle.

This fly should
float flush with the surface film and the wing should be sparse enough to almost
look translucent. the tail should be splayed or split.

The sulfur
spinner works well on the Pennsylvania streams where I fish